Powerware 208/120V Bedienungsanleitung PDF herunterladen (Seite 17)

INSTALLATION

EATON Powerware

Energy Management System (EMS) Upgrade Kit User’s Guide S 164201724 Rev 1 www.powerware.com

3. Attach the mounting bracket to the wall with appropriate wall

anchors (not supplied). See the mounting template in Figure 3.

Verify that at least two wall anchors attach to studs within the wall.

376.5 mm

(14.82")

152.4 mm

(6.00")

152.4 mm

(6.00")

226.0 mm

(8.90")

283.5 mm

(11.16")

16.8 mm

(0.66")

∅ 12.7 mm

(0.50") TYP

∅ 5.3 mm

(0.21") TYP

Figure 3. Mounting Template

4. Slide the loosened front screws on the electronics module into the

slots on the mounting bracket.

5. Verify all screw holes are aligned. Reinstall the four screws

removed in Step 2, but do not fully tighten. See Figure 2.

6. If installing the optional conduit box, continue to Step 7. Otherwise,

proceed to Step 11.

7. Remove the front plate from each conduit box. Retain the plates

and screws for later reinstallation. See Figure 4.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 71 72

Keine Kommentare

Powerware 208/120V Bedienungsanleitung Seite 17