Powerware 9150 Bedienungsanleitung PDF herunterladen (Seite 52)

Operation

Powerware

9150 User’s Guide www.powerware.com

1234

786

Male Connector

(LanSafe III/FailSafe III or Modem)

5432

879

Female Connector

(OnliNet or ConnectUPS)

Figure 20. 9-Pin Serial Port

Use the female connector for a computer running OnliNet software or

for a ConnectUPS Adapter. The communication settingsare 19200 baud,

1 start bit, 8 data bits, No parity, and 1 stop bit. See the following table

for pin assignments.

RS-232Connection(Female)

Pin 1 Received data

Pin 2 Transmitted data

Pin 3 AC input failure, closing to Pin 4

Pin 4 Signal ground

Pin 5 Impending battery low, closing to Pin 4

Pin 8 +DC auxiliary power

Pin 9 Chassis ground

Use the male connector for a computer running LanSafe III/FailSafe III

software or for a modem connection. The communication settings are 1

start bit, 8 data bits, No parity, 1 stop bit, and XON/XOFF. The baud rate

is factory-set for 1200 baud and can be changed with a menu invoked by

sending

Control-C to the UPS. See the following table for pin assignments.

RS-232Connection(Male)

Pin 1 Data carrier detected

Pin 2 Received data

Pin 3 Transmitted data

Pin 4 Data terminal ready

Pin 5 Signal ground

Pin 7 Ready to send

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 63 64

Keine Kommentare

Powerware 9150 Bedienungsanleitung Seite 52